Pedicure
pedicure nail nipper, 115 mm, STAINLESS
This head cutter is part of our product range, specifically developed for the needs of diabetics. It is carefully manufactured in Solingen and meets the highest quality requirements. The scissors are made of stainless steel, sterilisable and anti-allergenic. The tips of this head cutter are rounded to minimize the risk of injury. With the head cutter nail clipper, the cutting of even the strongest toenails will be a piece of cake: the special crescent-like shape of the cutting edges, which corresponds to the natural shape of nails, facilitates the shortening of nails by optimally using the leverage effect. In addition, the head cutter is characterized by a particularly high degree of stability, since one part is "pierced" by the other (in contrast to most other clippers where the two parts are coated and then riveted). This model is especially suitable for smaller ladies' hands; for men, we offer a larger model of head cutter with a length of 140 mm. The double spring easily presses the clippers. As the weakest part of the clippers, it can be easily exchanged in case it break under pressure. Replacement springs are, of course, also available through our shop.
pedicure nail nipper, 140 mm, box-joint, double spring, stainless steel with mat finish
For a long service life, these pedicure nail nippers made of stainless steel are hot-forged by the traditional Solingen blacksmith Erich Seiffert and then manufactured in traditional craftsmanship in Solingen. These pedicure nail nippers are designed to cut even the hardest of toenails cleanly and effortlessly. With a total length of 140 mm, it fully uses the leverage of its long shanks. The box-jointed production method ensures a high level of stability. "Box jointed" means that the passage in the nipper's upper part is first heated red-hot and widened in order to then feed the lower part through. In a final step the cutting edges of these nippers are finally adjusted by hand so that they close precisely and cut the nails cleanly. In the case of nippers, "closing precisely" means that the two cutting edges initially only meet at their very tips, while a column of light is still visible through the rest of the cutting edge. The cutting edges close completely from top to bottom, when slight pressure is being applied on the handles. So the nail is cut cleanly and not squeezed off! The double spring, which pushes the nippers open again after cutting, can of course be easily replaced, if broken or tired after a long period of use. Replacement springs are available from this shop. Made entirely of stainless steel, these premium quality nail nippers are hypoallergenic and can be both hygienically disinfected and sterile treated. The mat-frosted finish allows for a glare-free work.
pedicure nail nipper, 140 mm, box-joint, double spring, with protective leather cap, stainless steel with mat finish
These premium quality pedicure nail nippers make it much easier to shorten even the strongest finger and toenails. Firstly, there is the special moonshape of the cutting edges. It enables the pliers to be handled at a favorable angle. Secondly, the box-jointed production method, in which the lower fork is "placed through" the upper one, which is red-hot heated and widened, results in a high level of stability. These nippers are hot-forged from stainless steel by the traditional Solingen blacksmith Erich Seiffert and carefully handcrafted in Solingen. The cutting edges are filed by hand so that they close precisely and cut the nails cleanly. Simply top quality "made in Solingen"! Supplied with a leather hood to protect the pliers head. The double spring opens these nippers. Being the weakest wearing part of these nippers, the springs can be easily replaced should they break under load. Of course, replacement springs can also be obtained from our shop. Made entirely of stainless steel, these high-quality nail clippers are hypoallergenic and can be both hygienically disinfected and sterile treated. The mat-frosted finish allows for a glare-free work.
pedicure nail nipper, box-joint, 14 cm, STAINLESS
This head cutter is part of our product range, specifically developed for the needs of diabetics. It is carefully manufactured in Solingen and meets the highest quality requirements. The head cutter is made of stainless steel, sterilisable and anti-allergenic. The tips of this head cutter are rounded to minimize the risk of injury. With the head cutter nail clipper, the cutting of even the strongest toenails will be a piece of cake: the special crescent-like shape of the cutting edges, which corresponds to the natural shape of nails, facilitates the shortening of nails by optimally using the leverage effect. In addition, the head cutter is characterized by a particularly high degree of stability, since one part is "pierced" by the other (in contrast to most other clippers where the two parts are coated and then riveted). This model is especially suitable for men; for smaller ladies' hands, we offer a larger model of head cutter with a length of 115 mm. The double spring easily presses the clippers. As the weakest part of the clippers, it can be easily exchanged in case it break under pressure. Replacement springs are, of course, also available through our shop.
pedicure nipper, 130 mm, straight blades, box-joint, double spring, stainless steel with mat finish
For a long service life, these corner nail nippers made of stainless steel are hot-forged by the traditional Solingen blacksmith Erich Seiffert and then manufactured in traditional craftsmanship in Solingen. These corner nail nippers with their straight blades are specially designed to cut ingrown toenails cleanly. With a total length of 130 mm, it fully uses the leverage of its long shanks. The box-jointed production method ensures a high level of stability. "Box jointed" means that the passage in the nipper's upper part is first heated red-hot and widened in order to then feed the lower part through. In a final step the cutting edges of these corner nail nippers are finally adjusted by hand so that they close precisely and cut the nails cleanly. In the case of nippers, "closing precisely" means that the two cutting edges initially only meet at their very tips, while a column of light is still visible through the rest of the cutting edge. The cutting edges close completely from top to bottom, when slight pressure is being applied on the handles. So the nail is cut cleanly and not squeezed off! The double spring, which pushes the nippers open again after cutting, can of course be easily replaced, if broken or tired after a long period of use. Replacement springs are available from this shop. Made entirely of stainless steel, these premium quality nail nippers are hypoallergenic and can be both hygienically disinfected and sterile treated. The mat-frosted finish allows for a glare-free work.
pedicure nipper, straight blades, 13 cm, STAINLESS
This nail edge clipper is part of our product range, specifically developed for the needs of diabetics. It is carefully manufactured in Solingen and meets the highest quality requirements. The clipper is made of stainless steel, sterilisable and anti-allergenic. The tips of this clipper are rounded to minimize the risk of injury. Nails edge clippers are particularly suitable for shortening strong nails. With this large clipper of 13 cm in length, you can easily deal with the strongest toenails due to its particularly high stability: one part is "pierced" by the other (unlike most other clippers, where the two parts are coated and then riveted). The double spring easily presses the clippers. As the weakest part of the clippers, it can be easily exchanged in case it break under pressure. Replacement springs are, of course, also available through our shop.
Our pedicure tools are crafted from high-quality stainless steel and precision-ground metals to ensure durability, rust resistance, and long-lasting sharpness. Many products also feature ergonomic handles for better grip and control during use.
After each use, rinse the tools under warm water, gently brush away residue, and dry them thoroughly. For deeper hygiene, apply a disinfectant suitable for metal tools. Keeping them dry and stored in a protective pouch helps prevent corrosion and maintain performance.
Yes. Many of our clippers and nippers are engineered with reinforced blades that cut through thick nails cleanly, reducing pressure and preventing cracks.
Absolutely. Many tools are crafted with polished edges and fine abrasives to ensure effective results without causing irritation when used gently.
Most tools, such as files and rasps, work effectively on dry skin for precise removal. They can also be used after a warm foot soak for a softer, more comfortable experience.